0 like 0 dislike
6 views
Know here all about mechanics of metal cutting operations. What is metal cutting operations? How does it works with tool, forces and other workpiece?
asked in Production Engineering by (9.2k points) | 6 views

1 Answer

0 like 0 dislike

Explain mechanics of metal cutting.

Metal cutting operation is illustrated in figure. The work piece is securely clamped in a machine tool vice or clamps or chuck or collet. A wedge shape tool is set to a certain depth of cut and is forced to move in direction as shown in figure (mechanics of metal cutting operations).

All traditional machining processes require a cutting tool having a basic wedge shape at the cutting edge.

Tool's properties

The tool will cut or shear off the metal, provided (i) the tool is harder than the metal, (ii) the tool is properly shaped so that its edge can be effective in cutting the metal, (iii) the tool is strong enough to resist cutting pressures but keen enough to sever the metal, and (iv) provided there is movement of tool relative to the material or vice versa, so as to make cutting action possible.

General cutting tools

Most metal cutting is done by high speed steel tools or carbide tools. In metal cutting, the tool does not slide through metal as a jack knife does through wood, not does the tool split the metal as an axe does a log.

Actually, the metal is forced off the workpiece by being compressed, shearing off, and sliding along the face of the cutting tool. The way a cutting tool cuts the metal can be explained as follows.

All metals in the solid state have a characteristic crystalline structure, frequently referred to as grain structure. The grain or crystals vary in size from very fine to very coarse, depending upon the type of metal and its heat-treatment.

Cutting forces by tool

The cutting tool advances again in the work piece. Heavy forces are exerted on the crystals in front of the tool face. These crystals, in turn exert similar pressures on crystals ahead of them, in the direction of the cut or force applied by the cutter.

As the tool continues to advance, the material at sheared point is sheared by the cutting edge of the tool or it may be torn loose by the action of the bending chip which is being formed.

As the tool advances, maximum stress is exerted along sheared line, which is called the shear plane. This plane is approximately perpendicular to the cutting face of the tool.

There exists a shear zone on both sides of the shear plane, when the force of the tool exceeds the strength of the material at the shear plane, rupture or slippage of the crystalline grain structure occurs, thus forming the metal chip.

Chip formation of workpiece

The chip gets separated from the workpiece material and moves up along the tool face. In addition, when the metal is sheared, the crystals are elongated, the direction of elongation being different from that of shear.

The circles which represent the crystals in the uncut metal get elongated into ellipses after leaving the shearing plane. Hope, everything is now cleared about mechanics of cutting tools.

answered by (9.2k points)
266 questions
131 answers
1 comment
357 users